manualshive.com logo in svg

US Robotics USR8700, Руководство пользователя

Поделиться
Скачать
US Robotics USR8700 Скачать руководство пользователя страница 151

Serial ATA 4-Drive NAS

User Guide

Regulatory Information - 149

Regulatory Information

Manufacturer’s Declaration of Conformity

U.S. Robotics Corporation

 

935 National Parkway

 

Schaumburg, IL 60173

 

U.S.A.

declares that this product conforms to the FCC’s specifications:

 

Part 15, Class B 

Operation of this device is subject to the following conditions:

1. this device may not cause harmful electromagnetic interference, and

2. this device must accept any interference received including interference that may cause undesired 

operations.

This equipment complies with FCC Part 15 for Home and Office use. 

Caution to the User: Any changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.

Radio and Television Interference:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy. If this equipment is not installed and used in accordance with the manufacturer’s instructions, it 
may cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged 
to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to which the receiver is con-
nected.

•

Consult the dealer or an experienced radio/TV technician for help.

Содержание USR8700





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды