US Robotics USR8700, Руководство пользователя

Страница: 119 / 156

Serial ATA 4-Drive NAS
User Guide
Protecting Local Disks - 117
4. Review the settings for your NIC and select Next .
The recovery CD obtains the IP address to use from your DHCP server. If the displayed settings are
not the ones you need to use, or if no IP address is displayed, select
Config and specify the desired IP
address or subnet mask. (If you make a mistake typing either the IP address or subnet mask, select
Disable to clear the displayed information.) Then select OK and select Next .
5. In the Client Name field, enter the full computer name of this computer.
This name is always in upper case.
If you do not remember the full computer name, access the Web User Interface (as described in
“Accessing the Web User Interface” on page 25) and click Backups in the navigation bar. In the Pro-
tected disks list, the Computer Name column lists the computer name of each computer that has
backed up disks to the storage system.
6. If your computer is a member of a Windows domain, enter the domain name in the Domain Name
field. (If your computer is not a member of a Windows domain, leave this field blank.)
Initially, the recovery CD will attempt to connect to the storage system using only the computer name.
If this fails, the domain name will be appended as well. This ensures that your computer can be prop-
erly authenticated.
7. In the Recovery Server field, enter the name or IP address of the storage system where the backups
reside.
8. Make sure the selected authentication type is CHAP .
DiskSafe Express supports only CHAP authentication.
9. In the Recovery Password field, enter the recovery password that you specified when you protected
the disk or when you last changed the password.
If you do not remember your password, you can change it on the storage system (as described in
“Changing the Recovery Password” on page 62) and enter the new password here.
10. In the left column, select the backup that corresponds to the disk or partition that you need to recover.
If you protected only one disk or partition, only one item appears in this list.
If you protected multiple disks or partitions, you can identify the right item by looking at the Attr and
Size columns. The Attr column displays the attributes of each listed item ( D for disk, P for partition,
and S for system disk). For example, if you protected both a system disk and a data disk, the system
disk will be labeled S , and the data disk will be labeled D . If you protected disks of different sizes, the
Size column (which displays the number of megabytes) can also help you identify the right backup.
11. In the right column, select the date and time of the backup that you want to recover.
In general, selecting Base Disk is the same as selecting the most recent backup. However, if your sys-
tem crashed during the last backup, the base disk will be in an incomplete state. In that case, be sure
to select one of the listed backup dates rather than
Base Disk .
Note: You can use the storage system name only if your network has a DNS server.