US Robotics USR8700 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 156

background image

U.S. Robotics Corporation

935 National Parkway

Schaumburg, Illinois

60173-5157

USA

No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as a
translation, transformation, or adaptation) without written permission from U.S. Robotics Corporation. U.S. Robotics Corporation
reserves the right to revise this documentation and to make changes in the products and/or content of this document from time to
time without obligation to provide notification of such revision or change. U.S. Robotics Corporation provides this documentation
without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fit-
ness for a particular purpose. If there is any software on removable media described in this documentation, it is furnished under a
license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media
in a directory named LICENSE. If you are unable to locate a copy, please contact USRobotics and a copy will be provided to you.

UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then this documentation and the soft-
ware described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered
as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR
2.101(a) and as such is provided with only such rights as are provided in USRobotics standard commercial license for the Soft-
ware. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June
1987) whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or
documentation contained in, or delivered to you in conjunction with, this Administrator Guide.

Copyright © 2006 U.S. Robotics Corporation. All rights reserved. U.S. Robotics and the USRobotics logo are registered trade-
marks of U.S. Robotics Corporation. Other product names are for identification purposes only and may be trademarks of their
respective companies. Product specifications subject to change without notice.

«
1
2
3
4
...
»

Содержание USR8700





























































































































































Отзывы:

Нет отзывов

Похожие инструкции для USR8700

Бренд: Kaleidescape Страницы: 24

ML-2010 - B/W Laser Printer

Бренд: Samsung Страницы: 25

Бренд: H3C Страницы: 34

eServer BladeCenter HS20Type 8832

Бренд: IBM Страницы: 158

Flex System x440 Compute Node

Бренд: IBM Страницы: 584

Бренд: PEAKnx Страницы: 14

Бренд: Ravpower Страницы: 15

Бренд: Gira Страницы: 6

Бренд: Zenith Страницы: 218

N2400 - TaskSmart - 1 GB RAM

Бренд: Compaq Страницы: 372

Бренд: Galleon Страницы: 47

Бренд: IBM Страницы: 194

PolySafe Depot Type C

Бренд: Denios Страницы: 8

Бренд: NCR Страницы: 10

JetFusion 2100 Series

Бренд: Paradyne Страницы: 296

Бренд: Digisol Страницы: 81

Бренд: Hypercom Страницы: 2

Бренд: Cayman Systems Страницы: 170

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды