urmet domus 1067/032, Руководство по программированию

Страница: 51 / 108

DS1067-035A
51
LBT8633
4.14.18 Answer machine
To allow that 1067/032 or 1067/042 control panel answers incoming telephone calls on PSTN line, it is necessary to
enable the answer machine function. This function is enabled separately for PSTN and GSM network (according to the
configuration, the control panel can answer only GSM calls and not PSTN calls, or vice versa). When the answers
incoming telephone calls is enabled on PSTN network, it is necessary to set the number of rings after which the
communicator will answer (for compatibility with other devices, for example answering machines); in case of GSM
network, the communicator answers after 5 rings.
NOTE :
with GSM answer machine disabled, GSM module remains normally off and is only put on for sending a call.
To enable the Answer machine function follow the instructions below:
1. Enter on the keypad the Installer code (default 000000) and press
OK key.
2. Press MENU key.
3. Press ▼ key until “TELEPHONE DIALER” appears on the display.
4. Press
OK key to confirm.
5. Press
▼ key until “ADVANCED” appears. Press OK key to confirm.
6. “ANSWER MACHINE” appears. Press
OK key to confirm.
7. Select PSTN with
▲ and ▼ keys and press OK key to confirm.
8. Select with
▲ and ▼ keys if the PSTN Answer machine is enabled or disabled; in case of
‘enabling' will appear the rings number: 2 RING, 4 RING, 8 RING. Press OK key to confirm
the selection.
9. Press ▼ key until “GSM” appears. Press OK key to confirm.
10. Select with
▲ and ▼ keys if the GSM Answer machine is enabled or disabled and press
OK key to confirm the selection.
11. Press ESC key repeatedly to exit from the menu.
4.14.19 Subscriber code for Alarm reception centre
When 1067/032 or 1067/042 control panel is connected to an Alarm reception centre, the control panel must
communicate the subscription code provided by the centre.
To store the subscriber code follow the instructions below:
1. Enter on the keypad the Installer code (default 000000) and press
OK key.
2. Press MENU key.
3. Press ▼ key until “TELEPHONE DIALER” appears on the display.
4. Press
OK key to confirm.
5. Press
▼ key until “ADVANCED” appears. Press OK key to confirm.
6. Press
▼ key until “REM. CTRL CODE” appears. Press OK key to confirm
7. Enter the subscriber code (8 digits) and press
OK key to confirm. To change an unwanted
digit move with ◄ key and overwrite it.
8. Press ESC key repeatedly to exit from the menu.
Us00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
PHONE NUMBERS
TELEPHONE DIALER
ADVANCED
ADVANCED
ANSWER MACHINE
ANSWER MACHINE
PSTN
PSTN
DISABLED
ANSWER MACHINE
GSM
GSM
DISABLE
Us00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
PHONE NUMBERS
TELEPHONE DIALER
ADVANCED
ADVANCED
REM. CTRL CODE
REM. CTRL CODE
xxxxxxxx