urmet domus 1067/032, Руководство по программированию

Страница: 34 / 108

DS1067-035A
34
LBT8633
4.10.4 Radio input attributes: Bypass allowed, Release type, Common input, AND inputs
The table below lists the available programming, according to the type of input:
Device 1058/101 1058/201
Programming Value Reed contact Aux contact Notes
Bypass not allowed Bypass not allowed Bypass not allowed
Bypass allowed
Bypass allowed (default) Bypass allowed (default) Bypass allowed (default)
Single Single Single
Release type
Double Double Double
AND zones AND zones AND zones
Common input
OR zones OR zones OR zones
Each of these
attributes can be
programmed
individually
(default)
Do not assign
another input
(default)
Do not assign
another input
(default)
Do not assign
another input
AND Inputs
Assign another input Assign another input Assign another input
The other
assigned input
must feature
the same
customization
For complete description relevant to the multiple attributes applicable to radio inputs, refer to the description provided at
the paragraph dealing with wired devices since it is the same one: § 4.6.4
Bypass allowed and
; § 4.6.6
Burglar inputs
attributes.
4.10.5 Radio ancillary functions (Gong, Courtesy light, Door opener, Absence of move)
The table below lists the available programming, according to the type of input:
Device 1058/101 1058/201
Programming Value Reed contact Aux contact Notes
None (default) None (default) None (default)
Door opener Door opener Door opener
Courtesy light Courtesy light Courtesy light
Absence of move Absence of move Absence of move
Ancillary
functions
Gong Gong Gong
Only one of these
functions can be
assigned.
For complete description relevant to the ancillary functions applicable to radio inputs, refer to the description provided
at the paragraph dealing with wired devices since it is the same one: § 4.6.5 –
Ancillary functions.
4.10.6 Assigning a radio input to a videocamera
The table below lists the available programming, according to the type of input:
Device 1058/101 1058/201
Programming Value Reed contact Aux contact Notes
Do not assign (default) Do not assign (default) Do not assign (default)
Video assign
Video No. Video No. Video No.
Can only be
used if video
gateway
is provided
For complete description relevant to the assignment of a videocamera applicable to radio inputs, refer to the description
provided at the paragraph dealing with wired devices since it is the same one: § 4.6.7 –
Input associated to a video
camera.
4.10.7 Radio input programming
To program an radio input follow the instructions below:
1. Enter on the keypad the Installer code (default 000000) and press OK key.
2. Press MENU key.
3. Press ▼ key until “PROGRAMMING” appears on the display.
4. Press OK key to confirm.
5. Press ▼ key until “RADIO DEVICES” appears.
6. Press OK key to confirm. “EW01:EW01” appears.
7. Press OK key to confirm. Press ▼ key to select the desired type of device (IR; DC)
UT00: INSTALLER
PROGRAMMING
PROGRAMMING
RADIO DEVICES
RADIO DEVICES
EW01:EW01
EW01:EW01
SELECT DC