DS1067-035A
35
LBT8633
8. Press
OK
key to confirm. Select with
▼
key the desired input (DC01;DC02 etc.)
9. Press
OK
key to confirm. Press
▼
key to select the desired type of input
10. Press
OK
key to confirm.
11. Press
▼
key until “INPUT TYPE” appears. Press
OK
key to display the list of
available input types. Select the desired type with
▼
and
▲
keys and confirm it with
OK.
12. Press
▼
key until “ASSIGN” appears.
13. Press
OK
key to confirm.
14. Press
OK
key to select SYSTEM and with
▼
and
▲
keys select DO NOT ASSIGN,
in order not to associate the input to any zone, or ASSIGN to associate it to all the
zones, by confirming the selection with
OK
key. Otherwise it is possible to associate
to the input the single zones by pressing
▼
key when appears the image of step 11,
until “ZONES” appears.
15. Press
OK
key to confirm.
16. Select desired zones and press
OK
key to confirm.
17. Press
ESC
key repeatedly until “ASSIGN” appears again.
18. Press
▼
key until “CUSTOMIZE” appears. Press
OK
key to display the
configurations of available inputs. Select desired configuration with
▼
and
▲
keys
and confirm it with
OK
key.
19. If “Delayed burglar” configuration is selected, a new additional item concerning the
delay time of every input will appear. Select delay time by
▼
and
▲
keys. (Disabled,
10s, 30s, 1m, 1m30s, 5m, 20s).
20. Press
▼
key until “BYPASS ALLOWED” appears.
With
▼
and
▲
keys select “DISABLE”, to disable exclusion possibility, or “ENABLE”
to enable it, by confirming selection
with
OK
key
.
21. Press
▼
key until “ANCILLARY FUNCT.” appears
22. Press
OK
key to select additional functions NONE, ABSENCE OF MOVE, GONG,
COURTESY LIGHT, DOOR OPENER. Select the desired additional function with
OK
key.
23. Press
▼
key until”ATTRIBUTES” appears.
24. Press
OK
key. With
▼
,
▲
and
OK
keys it is possible to select and configure the
attributes RELEASE TYPE (Single or double) and COMMON INPUT (Zones AND or
Zones OR). It is possible to configure both characteristics types. At the end press
ESC
key to return to “ATTRIBUTES”.
25. Press
▼
key until “AND INPUTS” appears.
26. Press
OK
key. “DISPLAY AND” appears. With
▼
,
▲
and
OK
keys it is possible to
display (DISPLAY AND) the AND connections of the input or it is possible to select
(SELECT AND) to which other input can be connected the input, or disable
(DISABLE AND) the AND connection, if present. At the end press
ESC
key to return
to “AND INPUTS”.
27. Press
▼
key until “NAME” appears.
SELECT DC
DC01:...
DC01:...
DC01.In01: In01
DC01.In01: In01
INPUT TYPE
DC01.In01: In01
ASSIGN
ASSIGN
SYSTEM
ASSIGN
ZONES
ZN01:...
□□□□□□
DC01.In01: In01
CUSTOMIZE
DELAY
5s
DC01.In01: In01
BYPASS ALLOWED
DC01.In01: In01
ANCILLARY FUNCT.
DC01.In01: In01
ATTRIBUTES
ATTRIBUTES
RELEASE TYPE
DC01.In01: In01
ATTRIBUTES
DC01.In01: In01
AND INPUTS
AND INPUTS
DISPLAY AND
DC01.In01: In01
AND INPUTS
DC01.In01: In01
NAME
