CALL MODULES
USER MANUAL
3
DESCRIPTION OF TERMINAL BOARDS
KEYBOARD MODULE
VDD
Input v 18 V DC.
GND
GND.
AC2
Input voltage AC.
+C
Electrical lock output (+).
-C
Electrical lock output (-).
AC1
Input voltage AC.
LU
Doorphones line (riser).
0L
GND.
EI1
Controlled input contact (configured in menu).
EI2
Controlled input contact (configured in menu).
EI3
Controlled input contact (configured in menu).
EI4
Controlled input contact (configured in menu).
GND
GND.
OC2
Open collector output (configured in menu).
OC1
Open collector output (configured in menu).
PS
Generator output (configured in menu).
BASIC FEATURES
•
Power
doorphones,
•
Call to all doorphones,
•
Open door with general or individual codes,
•
Possibility of various EI1..EI4 input configuration, for example:
mailman button or direct call button,
•
Possibility of various OC1..OC2 output configuration, for
example: call switching on repeater (video control), output
activated by pressing doorphones additional button, code
activation,
•
Possibility of use PS output to attach local ring tone,
•
Programmable
system,
•
System information shown on LED display.
USER MANUAL
CALL TO DOORPHONES
Each user can be called by entering relevant 4-digit code from
range 1…9999. Call codes (logical codes) are assigned to relevant
doorphones physical codes. By default this is made by 1 to 1
relocation (physical code number 1 corresponds to logical code
number 1). Each doorphone has unique physical resulted from
address setting in doorphone.
After entering code user can wait for 3 seconds to initiate call or
press
#
to call immediate.
In case of mistake press
∗
button to cancel code, and enter correct
one.
•
Called doorphones will ring as long as it was programmed (1 to
30 seconds). After this time call will be cancelled. Pickup time is
signalled by recurrent double call signal (this option can be
turned on) – from 1 to 30 seconds,
•
Conversation is possible when user pick up the handset. During
conversation user can open the door (press open the door
button on doorphone). Pressing this button will generate
confirmation signal. The electrical lock will be open as long as
we programmed it (range 1 to 30 s). It will be indicated by
dashes on display.
Maximum time of conversation is between 1 to 120 s. After that time
in the receiver will be played signal to warn that the conversation is
nearly over, and after it, the conversation will be disconnected.
OPENING THE DOOR (CC –C) WITH
GENERAL CODES
We are able to open the door using one of 64, 4-digits general
opening codes.
To do it:
•
Press
#
button,
•
Enter general code,
•
Press
#
button to confirm.
This function can be disabled in programming menu.
OPENING THE DOOR (CC –C) WITH
INDIVIDUAL CODES
We are able to open the door using 1 of the individual 4-digits
opening code. To open door with this code first we have to enter
logical user code and then individual opening code which was
associated to it. Individual opening code can has from 5 to 8 digits.
To open the door:
•
Press
#
button,
•
Enter individual opening code (5 to 8 digits),
•
Press
#
button to confirm.
RELEASING EXO (CAN BE ATTACHED WITH OC1 OR
OC2) WITH GENERAL CODES
We are able to release OC1, OC2 outputs or electrical lock using
general opening codes (depending on configuration settings). It can
be realized by entering one of 64, 4-digits general opening codes.
To do it:
•
Double
press
#
button,
•
Enter general opening code,
•
Press
button
#
to confirm.
RELEASING EXO (CAN BE ATTACHED WITH OC1 OR
OC2) WITH INDIVIDUAL CODES
We are able to release OC1, OC2 outputs or electrical lock using
individual opening codes (depending on configuration settings). It
can be realized by entering flat number and then 4-digits opening
code.
To do it:
•
Press
#
button,
•
Enter general opening code (5 to 8 digits),
•
Press
#
button to confirm.
