URAL Motorcycles 2011 models Скачать руководство пользователя | Manualshive

Страница: 79 / 99

background image

79

LIMITED WARRANTY ON EMISSION CONTROL SYSTEM

Irbit MotorWorks of America, Inc.,

14700

NE 95

th

St

. Suite 102,

Redmond, WA 98052, USA

(hereinafter IMWA)

warrants that each new 2004 and later Ural motorcycle, that includes as standard

equipment a head

light, taillight and stoplight, and is street legal:

A.

is designed, built and equipped so as to conform at the time of initial retail purchase with all

applicable regulations of the United States Environmental Protection Agency, and the Cali-

fornia Air Resources Board; and

B.

is free from defects in material and workmanship which cause such motorcycle to fail to

conform with applicable regulations of the United States Environmental Protection Agency

or the California Air Resources Board for a period of use, depending on the engine displace-

ment: of 30,000 kilometers (18,641 miles), if the motorcycle’s engine displacement is 280

cubic centimeters or greater or 5 (fi ve) years from the date of initial retail delivery, which-

ever fi rst occurs.

I.

COVERAGE. Warranty defects shall be remedied during customary business hours at any

authorized IMWA motorcycle dealer located within the United States of America in compli-

ance with the Clean Air Act and applicable regulations of the United States Environmental

Protection Agency and the California Air Resources Board. Any part or parts replaced under

this warranty shall become the property of IMWA.

In the State of California only, emission related warranted parts are specifi cally defi ned

by the state’s Emission Warranty Parts List. These warranted parts are: carburetors, electron-

ic valves, air box, air cleaner element, spark plug, ignition coil, ignition control valve mod-

ule, catalyst, carbon absorber, operating valve for vacuum control.

In the State of California only, Emission Control System emergency repairs, as provided

for in the California Administrative Code, may be performed by other than an authorized

IMWA dealer. An emergency situation occurs when an authorized IMWA dealer is not rea-

sonably available, a part is not available within 30 (thirty) days, or a repair is not complete

within 30 days. Any replacement part can be used in an emergency repair. IMWA will reim-

burse the owner for the expenses, including diagnosis, not to exceed IMWA’s suggested retail

price for all warranted parts replaced and labor charges based on IMWA’s recommended time

allowance for the warranty repair and the geographically appropriate hourly labor rate. The

owner may be required to keep receipts and failed parts in order to receive compensation.

II.

LIMITATIONS. This Emission Control System warranty shall not cover any of the follow-

ing:

A. Repair or replacement required as a result of

(1)

Accident

(2)

Misuse

79

LIMITED WARRANTY ON EMISSION CONTROL SYSTEM

Irbit MotorWorks of America, Inc.,

14700

NE 95

th

St

. Suite 102,

Redmond, WA 98052, USA

(hereinafter IMWA)

warrants that each new 2004 and later Ural motorcycle, that includes as standard

equipment a head

light, taillight and stoplight, and is street legal:

A.

is designed, built and equipped so as to conform at the time of initial retail purchase with all

applicable regulations of the United States Environmental Protection Agency, and the Cali-

fornia Air Resources Board; and

B.

is free from defects in material and workmanship which cause such motorcycle to fail to

conform with applicable regulations of the United States Environmental Protection Agency

or the California Air Resources Board for a period of use, depending on the engine displace-

ment: of 30,000 kilometers (18,641 miles), if the motorcycle’s engine displacement is 280

cubic centimeters or greater or 5 (fi ve) years from the date of initial retail delivery, which-

ever fi rst occurs.

I.

COVERAGE. Warranty defects shall be remedied during customary business hours at any

authorized IMWA motorcycle dealer located within the United States of America in compli-

ance with the Clean Air Act and applicable regulations of the United States Environmental

Protection Agency and the California Air Resources Board. Any part or parts replaced under

this warranty shall become the property of IMWA.

In the State of California only, emission related warranted parts are specifi cally defi ned

by the state’s Emission Warranty Parts List. These warranted parts are: carburetors, electron-

ic valves, air box, air cleaner element, spark plug, ignition coil, ignition control valve mod-

ule, catalyst, carbon absorber, operating valve for vacuum control.

In the State of California only, Emission Control System emergency repairs, as provided

for in the California Administrative Code, may be performed by other than an authorized

IMWA dealer. An emergency situation occurs when an authorized IMWA dealer is not rea-

sonably available, a part is not available within 30 (thirty) days, or a repair is not complete

within 30 days. Any replacement part can be used in an emergency repair. IMWA will reim-

burse the owner for the expenses, including diagnosis, not to exceed IMWA’s suggested retail

price for all warranted parts replaced and labor charges based on IMWA’s recommended time

allowance for the warranty repair and the geographically appropriate hourly labor rate. The

owner may be required to keep receipts and failed parts in order to receive compensation.

II.

LIMITATIONS. This Emission Control System warranty shall not cover any of the follow-

ing:

A. Repair or replacement required as a result of

(1)

Accident

(2)

Misuse

«
...
77
78
79
80
81
...
»

Содержание 2011 models




































































































Отзывы:

Нет отзывов

Похожие инструкции для 2011 models

Бренд: Suzuki Страницы: 59

2001 GSX1300RK1 HAYABUSA

Бренд: Suzuki Страницы: 31

Бренд: CRATONI Страницы: 61

Бренд: TREND Страницы: 38

Бренд: Caberg Страницы: 16

Бренд: CyClone Страницы: 24

Бренд: IBEX Страницы: 2

HPS SafeGuard Series

Бренд: Dräger Страницы: 40

Бренд: Denali Страницы: 2

Бренд: Kinroad Страницы: 25

Бренд: HYOSUNG Страницы: 262

Бренд: Honda Страницы: 163

Бренд: Honda Страницы: 132

2013 690 SMC R EU

Бренд: KTM Страницы: 230

Бренд: CASAL Страницы: 25

Бренд: R&G Страницы: 12

Бренд: Da Brim Страницы: 2

Бренд: Thunderbike Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды