Unitec DS-205.4, Руководство пользователя

Страница: 43 / 46

42
Electrical Installation
Error message on the Servo
In case of an error the red LED ‘fault’ lights up and the green 7-segment display indicates
the error number.
Error list
Display
on the
Servo
Error message
on the NDrive
Description
IP-
address
Ox8f
0 BADPARAS Parameter error bit 0
1 POWER FAULT Output stage error bit 1
2 RFE FAULT Error in the safety circuit bit 2
3 BUS TIMEOUT Transfer error BUS bit 3
4 FEEDBACK Incorrect/faulty encoder signal bit 4
5 POWERVOLTAGE No power supply voltage bit 5
6 MOTORTEMP Motor temperature too high bit 6
7 DEVICETEMP Device temperature too high bit 7
8 OVERVOLTAGE Over voltage >1.8 x UN bit 8
9 I_PEAK Overcurrent 300% bit 9
A RACEAWAY Racing (without command value, incorrect polarity) bit 10
B USER User’s error choice bit 11
C RESERVE bit 12
D RESERVE bit 13
E CPU-ERROR Software error bit 14
F BALLAST Ballast circuitry overload bit 15
Flashing decimal point Active processor
Dark decimal point Missing auxiliary voltage or device hardware failure
Example:
FAULT LED red
Error no. 5 Power voltage (missing power voltage)
F
a
u
lt
E
rr
o
r
lis
t