7
DS 205.3 ; DS403.4
Construction, characteristics:
Cabinet-mounted device in an all-steel housing.
In compliance with VDE/DIN and EU guidelines. (IP20, VGB4).
Standard fully-digital regulation electronics.
Power electronics from 5A ;3A (S1 - operation).
Power input voltage 30V~ to 480V~.
Independent 24V - chopper power supply unit for auxiliary voltages.
DC decoupling between:
the housing to all electrical parts
auxiliary voltage connection to power unit and control electronics,
power unit and control electronics
Control electronics and logic inputs.
The clearance in air and leakage distances comply with VDE.
Used are:
Generously dimensioned, fully insulated FET or IGBT - power semiconductors.
Only commercially available, industrial standard components,
SMD - placed,
LED displays
Characteristics:
*
Direct to 230 V
~
(DS 205xx), up to 480 V
~
(DS403xx) mains connection
*
Independent 24V= auxiliary voltage connection.
*
Digital RS232, CAN-BUS (additional option) interfaces.
*
Analog inputs, programmable differential inputs,
*
Digital programmable inputs/outputs. Opto-decoupled,
*
Enable and limit switch logic,
*
Ready for operation signal BTB, relay contact.
*
Position, speed and torque regulation,
*
Incremental resolver or encoder (optionally a sinus transmitter),
*
Encoder output,
*
Static and dynamic current limit.
*
Standard, fully digital control unit,
*
Intrinsically safe, short-circuit proof power unit,
*
DC-BUS choke (EMC choke),
*
Integrated regenerative discharge circuit,
*
DC power bus.
*
Processor-independent safety switch-off when either the amplifier or the motor have
*
over voltage, under voltage, a short circuit, a line-to-earth fault or excess
temperature.
F
e
a
tu
re
Содержание DS-205.4
Страница 3: ...2 DS 205 3 DS403 4 Blank page...
Страница 11: ...Basic Information 10...
Страница 16: ...15 DS 205 3 DS403 4...
Страница 45: ...44 Electrical Installation Optionen...