Unitec DS-205.4, Руководство пользователя

Страница: 5 / 46

4
DS 205.3 ; DS403.4
The user must ensure:
- that when the unit fails
- when an operator error occurs,
- when the controlling and control units fail, etc..
the drive homes to a safe operating state.
Apart from that machines and installations must be provided
with monitoring and safety systems independent from the unit.
Danger to man and property must be impossible to incur!
Assembly work
- only if all power is cut
- only by qualified professionals
I nstallation work
- only if all power is cut
- only by qualified electrical professionals
- Comply with safety regulations
Setting and programming work
- only by qualified professionally specialised in electronic drives and software
- observe programming notes
- Comply with safety regulations
CE:
When it is mounted in machines and installations the proper operation of the unit is not
permitted until the machine or installation has been approved according to the regulations
of the EC machine directive 2006/42/EG, and the EMC directive 2004/108/EG .
Die EC directive 2004/108/EG plus the EMC standards EN61000-2 and EN61000-4
are complied with in the EMC Notes chapter specified installation and test conditions.
A manufacturer’s certificate is available.
The manufacturer of the machine or the installation is responsible for the observance of the
threshold values prescribed in the EMC regulations..
QS:
Based on their serial number and test data the units are archived by the manufacturer for 5
years.
The test certificates are available on request.
Safety symbols
Attention danger
Attention
High voltage
Warning
Important
S
a
fe
ty
in
st
ra
ct
io
n
s