Page 9
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
7.0 FRONT PANEL DESCRIPTION
OPTION A – MINIATURE CIRCUIT BREAKERS
BATTERY
BREAKERS
DC DISTRIBUTION
1-8 CIRCUIT BREAKERS
LOAD
CURRENT
DISPLAY
16 LED
STATUS & ALARM
MATRIX
HOT-SWAP RECTIFIER MODULES
OPTION B – GMT FUSES
DC DISTRIBUTION
10 GMT FUSES
OPTION C – BULK FEED CIRCUIT BREAKERS
DC DISTRIBUTION
1-4 CIRCUIT BREAKERS
Figure 2 - Front Panels with Bezel Removed
7.1
From left to right there are 3 rectifier slots. Each slot can accept one rectifier from the
RADIAN Series rated up to 1200W output power. Only identical model rectifiers of
appropriate output voltage may be installed at the same time. For example, a nominal
-48V system may contain between 1 and 3 model RPCP48/22-Z OR between 1 and
3 model RPCM48/15-Z but not a mixture of the two types.
7.2
Above rectifiers is the distribution and display section. There are 3 types of DC
distribution depending on the option that has been specified.
7.2.1
Option A provides up to 8 DC load circuits with miniature circuit breaker
protection. Each circuit may be specified with a breaker of maximum rating
30A.
7.2.2
Option B provides a total of 10 DC load circuits with GMT fuse protection.
Each circuit can employ a maximum fuse rating of 12A.
