Page 40
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
12.9 System
The
Controller System Settings
page enables a user to alter the controller’s real-time
clock date and time settings. New date and time settings can be entered manually
or automatically synchronized with a ‘host’ system.
Figure 13 - Controller System Settings WEB Page (typical)
12.9.1 Manual Setting
To enter a new date and/or time manually either use the up/down buttons
to dial in the desired settings or type them directly into the required boxes.
Press the ENTER key in each case to confirm.
Once the desired settings have been enter click on the SET button to upload
them.
12.9.2 Automatic Setting
To synchronize the date and time with the computer being used to access
the controller click on the SYNC button to load the new settings from the
computer and then click on the SET button to upload them.
To update this page with the controller’s current date and time click on the GET
button.
