Page 6
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
4.0 WARRANTY (summary)
X100 Series DC power systems are warranted for two (2) years from date of shipment
against defects in material and workmanship. This warranty does not extend to products
which have been opened, altered or repaired by persons other than persons authorized by
the manufacturer or to products which become defective due to acts of God, negligence or
the failure of customer to fully follow instructions with respect to installation, application
or maintenance.
For a complete text of UNIPOWER’s warranty conditions please request a copy from your
local Sales Office.
5.0 UNPACKING AND INSPECTION
5.1
This X100 DC power system was carefully tested, inspected and packaged for
shipment from our factory. Upon receipt the unit should be carefully unpacked and
inspected for any damage in shipment.
5.2
If there is evidence of damage,
do not attempt to install the unit
. The freight
carrier should be notified immediately and a claim for the cost of the X100 should
be filed with the carrier for direct reimbursement. Be sure to include the model and
serial number of the damaged unit in all correspondence with the freight carrier.
Also save the shipping carton and packing material as evidence of damage for the
freight carrier’s inspection.
5.3
UNIPOWER will cooperate fully in case of any shipping damage investigation.
5.4
Always save the packing materials for later use in shipping the unit. Never ship the
system or the rectifier modules without proper packing.
