Page 21
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
Ensure that ‘Enable Java content in the browser’ is checked and leave the “Security Level”
set to “High (minimum recommended)”
Click on the Manage Site List button and the following will appear.
Click the Add button and type in the IP address of the controller in the format
‘http://xxx.xxx.xxx.xxx’ (substitute the IP address set in the controller). A warning will
appear indicating that this is a security risk. Press Continue to allow the site to be added.
Now press OK and then OK again to close the Java control panel.
You should now be able to access the controller web pages and see the applets running.
Note that if you try to access a controller that has not been added to the exception list as
above using a Browser with Java 7u60 or later installed you will get the following:
Note also that when accessing an allowed controller the following will appear at the start
of each Browser session. Click OK to proceed. It will not appear again unless the Browser
