Page 45
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
7. Settings
OVER VOLTAGE ALARM SETTING
- Setting for over voltage alarm.
UNDER VOLTAGE ALARM SETTING
- Setting for under voltage alarm.
END VOLTAGE ALARM SETTING
- Setting for end voltage alarm.
LVD1OFF SETTING
- Setting for voltage at the point where LVD1 will be shut off.
LVD1ON SETTING
- Setting for voltage at the point where LVD1 will be turned on.
LVD2OFF SETTING
- Setting for voltage at the point where LVD2 will be shut off.
LVD2ON SETTING
- Setting for voltage at the point where LVD2 will be turned on.
FLOAT VOLTAGE
- Voltage setting for the bus in float mode (modified by temp.
compensation).
EQUALIZE VOLTAGE
- Voltage setting for the bus in equalization mode.
NOMINAL SYSTEM VOLTAGE
- The nominal system voltage (12, 24 or 48).
CONTROLLER OVER TEMPERATURE ALARM
- The controller temperature, in degrees
Celsius, above which an over temperature alarm will activate.
BATTERY OVER TEMPERATURE ALARM
- The battery temperature, in degrees Celsius,
above which an over temperature alarm will activate.
EXTERNAL OVER TEMPERATURE ALARM
- The external temperature, in degrees Celsius,
above which an over temperature alarm will activate.
TEMPERATURE COMPENSATION SLOPE
- The parameter applied, in millivolts/°C/cell,
to the float voltage to achieve temperature compensation.
TEMPERATURE COMPENSATION MAX TEMPERATURE
- The temperature above which
no further temperature compensation will be applied.
TEMPERATURE COMPENSATION MIN TEMPERATURE
- The temperature below which
no further temperature compensation will be applied.
