Page 28
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
12.4
Controller Site Installation
The
Controller Site Installation
page provides the system integrator or installer
facilities for setting up the main system parameters.
Figure 8 - Controller Site Installation WEB Page (typical)
To retrieve the currently programmed settings from the X100 click on REFRESH.
After a few seconds the values will be displayed.
To reprogram to the factory default settings click on DEFAULT. After a few seconds
the default values will be displayed.
To setup this page for a new configuration type in or select each new entry required
and click on ENTER to confirm that entry. Once all required entries have been
made click on UPLOAD. To confirm the new settings have been programmed into
the X100 click on REFRESH. Check the entries after a few seconds to make sure
they are still as required.
Each setting that can be made on this page is described below in detail:
