Page 39
X100 SERIES
INSTALLATION & OPERATING MANUAL
Manual No. x100-5a
x100-man-Rev5a-0214.indd
12.8 Control
The
Controller Control Panel
page is used to remotely switch the system between
FLOAT and EQUALIZE modes. This page displays various system status functions
enabling the operator to monitor these system parameters from a remote location.
To set the system to equalize mode click on the EQUALIZE button. After a few
seconds the unit will respond by switching off the FLT LED indicator and switching
on the EQU LED indicator.
To return the system to float mode, click on the FLOAT button. The unit will respond
by returning the FLT and EQU LED indicators to their normal state.
Note that if the unit is not returned to float mode manually it will be returned
automatically after the pre-programmed time has elapsed.
Figure 12 - Controller Control Panel WEB Page (typical)
