Union CWD2005 DPC, Руководство по эксплуатации

Страница: 100 / 120

CWD2005 DPC
chapter — page:
8—4
WARNING
Serious risk of injury from exiting gas.
•
Before maintenance works, shut down the combustion calorimeter and, if
necessary, any connected system components!
•
The gas connections may only be established by trained personnel. Follow
the applicable guidelines at the installation site.
•
Incomplete combustion during servicing can cause the exhaust air to be
loaded with process gas!
•
In the case of toxic gases, observe the safety instructions at the setup site!
•
Serious risk of injury due to burns at burner components!
Observe the cool-down time of 15 min before servicing the burner system!
8.1.2 Maintenance work/Inspection
NOTE
The maintenance work must be carried out in accordance with the inspection and
maintenance schedule! The type and extent of the wear depends on the individual
application and operating conditions. Thus, all maintenance intervals specified
are guide values only.
Maintenance work at the gas analysing device and components of the system are
described in the provided documentation – observe intervals and work pro-
cesses!
DANGER
Loss of protective function!
The type and degree of wear and tear highly depends on the individual conditions
of usage and operation. Thus, all maintenance intervals specified are guide values
only.