Motor Side Drive - MSD
MTV Series
MANUAL
1.050.0
MOUNTING
Type 1a
Type 2
The maximum speed and the maximum torque of the motor must not exceed the limits of the Linear Unit CTV.
For the values of speed and torque, please see our catalogue UNIMOTION Linear Units.
6
Type 1b
Type 1a / 1b
STEP 1:
The housing of the motor
side drive - MSD must be mounted
and screwed on the drive block of
the linear unit. The housing can be
mounted in any way - UP, DOWN,
RIGHT or LEFT.
STEP 2:
After the housing has
been mounted on the Linear Unit,
the belt sprocket with toothed belt
and self locking device must be
fitted on the ball screw journal of
the Linear Unit. Adjust the
clearance as shown in the picture.
The motor side drive - MSD
can only be used on the Liner
unit with the ball screw journal
without keyway - ball screw
journal type 0 - more info see
our cataloge „UNIMOTION
Linear Units“ on page 6.005.0
Types of journal tensioning
units.
CLEARANCE:
This dimension is on
the
linear unit side.
For tightening torques for the screws please refer to page number 1.005.0
STEP 1
STEP 2
The specifications in order to improve the products in this catalogue are subject to change without notice.
