Mechanical and inductive switch
MTV Series
MANUAL
1.040.0
MOUNTING
Activation block
Mechanical switch with the bracket
Inductive switch with the bracket
STEP 1:
Mount the activation block
on the side of the carriage by the
thread holes. The activation block
can be mounted on the carriage on
the left or right side. After the
activation block is placed, tighten
the screws.
STEP 2:
Place either the mechanical
switch or the inductive switch with
brackets in the slots and position
them in the desired location. The
mechanical or inductive switch with
brackets can be placed in the slots
either on the left or right side of the
profile of the Linear Unit.
STEP 3:
After the mechanical or
inductive switch with bracket is
placed in the desired place in slots,
tighten the screws of the bracket.
For tightening torques for the screws please refer to page number 1.005.0
STEP 1
STEP 2
STEP 3
The specifications in order to improve the products in this catalogue are subject to change without notice.
