Unimotion MTV 65, Инструкция по использованию, обслуживанию и сборке, Страница: 14 / 22

1.055.0
MTV Series
MANUAL
Motor side drive - MSD
MOUNTING
6
6
F
F
STEP 3a: Mount the motor onto the
housing and lightly tension the
tightening screws of the motor.
When the motor is mounted, mount
the belt sprocket with the tension unit
onto the motor journal.
Adjust the clearance as shown in the
picture. Tension the tension unit.
Tension the motor with the belt with
the pretensioning force F and tighten
the motor down on the housing. The
pretensioning force F depends of the
size of the Linear Unit and motor.
STEP 3b: Mount the motor onto the
housing and tension lightly the
tightening screws of the motor.
When the motor is mounted, mount
the belt sprocke tension unit onto the
motor journal.
Adjust the clearance as shown on the
picture. Tension the tension unit.
Tension the motor with the belt with
the pretensioning force F and tighten
the motor down on the housing.
The pretensioning force F depends of
the size of the Linear Unit and motor.
CLEARANCE:
This dimension is
on the motor side
CLEARANCE:
This dimension is
on motor side
RATIO i:=1
RATIO i:=1,5 or 2
For tightening torques for the screws please refer to page number 1.005.0
STEP 3a
STEP 3b
The specifications in order to improve the products in this catalogue are subject to change without notice.
Type 1a / 1b
Type 1b / 2