48
When using your device for prolonged periods of time, such as
when you’re talking on the phone, charging the battery or
browsing the Web, the device may become warm. In most cases,
this condition is normal and therefore should not be interpreted
as a problem with the device.
Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside the device should be done by an
authorized service technician or provider.
Protect your phone
• Always treat your phone and its accessories with care and keep
them in a clean and dust-free place.
• Do not expose your phone or its accesso
ries to open flames or
lit tobacco products.
• Do not expose your phone or its accessories to liquid, moisture
or high humidity.
• Do not drop, throw or try to bend your phone or its accessories.
• Do not use harsh chemicals, cleaning solvents, or
aerosols to
clean the device or its accessories.
• Do not paint your phone or its accessories.
• Do not attempt to disassemble your phone or its accessories,
only authorized personnel must do so.
• Do not expose your phone or its accessories to extreme
temperatures, minimum -4°F (-20°C) and maximum 122°F
(50°C).
• Please check local regulations for disposal of electronic
products.
• Do not carry your phone in your back pocket as it could break
when you sit down. Damage requiring service
Unplug the product from the electrical outlet and refer
servicing to an authorized service technician or provider under
the following conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
•
The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the
operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in a wet location.
Avoid using your device after a dramatic change in temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the
device, allow sufficient time for the moisture to evaporate
before using the device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from high-
temperature conditions into a cooler environment, allow the
