FOODBOX / FOODBOX LONG
Version 3.4 / November 2016
Page 77
To enhance the pushing effect by the rotating spiral and reduction of
probability of its tipping over, the spiral can be equipped with a special
pusher, which is fitted to the front of it (see figure 47).
Fig.47 - Pusher
4.7 ADjUStING tHE SHELf HEIGHt
2
1
3
•
Remove all products from the shelves and then re-
move shelves one by one (see figure 4.6.1);
• Unscrew the screw (see figure 48, position 1) of the
guide, which needs to be removed;
• Remove the guide (see figure 48, position 2) from the
groove (see figure 48, position 3);
•
install the guide at its new spot, setting it in the groove
and tightening the screw (see figure 48, position 1).
Fig.48 - installing the shelf guide
The Machine has 7 motors for 7 shelves.
The connector is under the lower shelf, which is fixed to the right
wall of the dispensing compartment (see figure 49).
To install the seventh shelf you will need to order:
1 - Set of shelves;
2 - Complete guides (left and right)
Fig.49 - Location of the connector for the 7th shelf
4.8 CoNSERVAtIoN
This Machine cannot be conserved.
