Unicum Foodbox Скачать руководство пользователя страница 59

Страница: 59 / 79

ТМ

FOODBOX / FOODBOX LONG

Version 3.4 / November 2016

Page 59

2.4.4.2.2 Menu item [2.2 CASH]

Sub-menu

Description

2.2 Cash

Machines configurations to handle cash

2.2.1 Manual Coin ln

Upon entry it is allowed to load coins in tubes manually through coin entry slots,

located on the front of the management compartment and loading banknotes to

recharge change availability.

At the same time the LCD shows information regarding the selected tube: denom-

ination of the loaded coin. Letter “F” indicates that the tube is full.

After recognizing the loaded coins, you will see information about the tube to which

that given coin was deposited

2.2.2 Manual Coin Out

This menu item is hidden if the Machine is in Operator’s menu, but Operator’s

privileges do not give access to coin discharge (privileges are set in technician’s

menu).

in the given mode the LCD shows information about the tube selected for dis-

charge (withdrawal) of coins: coin denomination, number of coins.

For discharge of one coin from the selected tube press “→”

2.2.3 Change motor test

At the entrance test is performed motor delivery

2.2.4 Bill cash box (provided

if the modem is installed)

When entered sends a simulated stacker emptying signal to the server (collection

signal) in cases when there is no Bank Note Acceptor (BNA), or the stacker sensor

is broken

2.2.5 Print Z-report(s)

if you press the enter key the Z-report is printed/ shift is closed (if there is a cheque

printer connected to the Machine).

Show cheque printer’s status

Содержание Foodbox
















































































Результаты поиска

Содержание Foodbox

Отзывы:

Похожие инструкции для Foodbox

Бренды по названию

Популярные бренды

Unicum Foodbox, Руководство пользователя

Результаты поиска

Содержание Foodbox

Отзывы:

Похожие инструкции для Foodbox

Бренды по названию

Популярные бренды