FOODBOX / FOODBOX LONG
Version 3.4 / November 2016
Page 7
Safety requirements
it is important and necessary, before the installation and use of the Machine, to read and understand
the instructions contained in this Manual, which address important issues related to Machine’s safety in
use and it’s servicing.
Main types of safety that can pose threat to life:
Threat of electrocution – The Machines operate on dangerous for life ~230V. During servicing
(use) of Machines, it is necessary to observe safety measures, which are specific for use of
electrical units of the given type.
Trauma caused by Machine tipping/falling! The Machines are pretty heavy and large. in case
of improper installation of the Machine it can tip/fall on a person. To avoid this, it is necessary
to observe the installation requirements and use all necessary or additional fittings for Ma
-
chine installation.
Gas poisoning due to leakage of coolant! The Machine has a refrigeration unit fitted in it. This
refrigeration unit works on coolant type R134a. During technical servicing, it is important to
make sure that the refrigeration unit’s joints are not leaking and to observe the requirements
of storage and transportation. in case of leakage of it is necessary to immediately vent the
premises, evacuate everyone from the premises and call the technical personnel.
Hazardous for the Machine! Do not use water jet devices, such as hose pipes, for washing
the Machine.
The Machine installation specialist must know the structure and operating principles of the Machine
very nicely.
The manufacturer guarantees the functional dependability and efficiency of technical servicing of Ma
-
chines only in case of use of genuine spare parts.
Only use food products in the Machine, which are properly packed for use in vending machines.
Vending machines of this type are not meant for outside use.
The Machines must be installed in dry location, where the air temperature does not fall below 1
0
С and
does not exceed 35
0
C.
Due to a non-stop improvement process for the Machines their structure can be changed (amended), in
ways not affecting the type of their functioning and such amendments may not be covered in this Manual.
Some descriptions, contained in the current Manual, may not be valid for certain models of bank note
acceptors and other peripheral devices, which are part of the Machine.
When servicing the peripheral devices it is necessary to follow their documentation, which is included
in the user documentation and is supplied with the Machine.
Manufacturer’s warranty
The manufacturer’s warranty during the warranty period covers all vending machine units and as-
semblies, except for malfunctions, arising from non-observance of current maintenance documentation
requirements by the customer or due to any mechanical failures.
The following components are excluded from the manufacturer’s warranty:
•
Fuses;
•
Control board batteries.
