Unicorn ENDAT-586EL, Руководство пользователя

Страница: 39 / 58

Chapter 5. LAN Adapter
The on-board LAN adapter use of Single Chip Fast Ethernet Controller, that is
highly integrated and requires no “glue” logic external memory on board. It runs in
the bus master mode and directly sending/receiving Ethernet packet to/from
memory. The On-board LAN adapter can directly fetch the system CPU. Also, it
can transfer data Directly between I/O devices and system memory in the 32-bit bus
master mode that provides low CPU utilization.
It complies with the IEEE 802.3u standard, IEEE802.3 standard and PCI Local Bus
version 2.1 and transmits data on the network at 100 Mbps or 10 Mbps. It also
operates in full-duplex mode that
doubles the network speed up to 20/200
Mbps when working with Fast Switching Hub. Built-in one RJ-45 port for
connection of 100Base-TX Fast Ethernet or 10Base-T Ethernet network, and
automatically senses the connection type.
5-1. Features
•
Full compliancy with PCI Rev. 2.1
•
Complies with the Ethernet/IEEE 802.3u 100Base-TX and 10 Base-T
industry standard
•
Supports full-duplex operations, thus doubling the network speed up to
20Mbps on 10 Base-T Ethernet or 200Mbps on 100 Base-TX Fast Ethernet
when setting in full duplex mode
•
Two LED indicators to report network status
•
One RJ-45 connector with Auto-sense cable type of 10 or 100Mbps network
operation
•
Supports PCI clock speed up to 33MHz, capable of zero wait states
•
Supports optional Remote Boot ROM socket
•
Provides a comprehensive setup program for displaying the adapter
configuration and includes diagnostic on board or network tests.