Unicorn ENDAT-586EL, Руководство пользователя

Страница: 31 / 58

25
The ENDAT-586EL All -In-One motherboard
3-6. Integrated Peripherals
ROM PCI/KISA BIOS (2A5LEU4B)
INTEGRATED PERIPHERALS
OnChip IDE First Channel : Enabled
OnChip IDE Second Channel : Enabled
IDE Prefetch Mode : Enabled
IDE HDD Block Mode : Enabled
IDE Primary Master PIO : Auto
IDE Primary Slave PIO : Auto
IDE Secondary master PIO : Auto
IDE Secondary Slave PIO : Auto
IDE Primary Master UDMA : Disabled
IDE Primary Slave UDMA : Disabled
IDE Secondary Master UDMA : Disabled
IDE Secondary Slave UDMA : Disabled
Init. Display First : PCI Slot
Onboard FDD Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
UART 2 Mode : Standard
Onboard Parallel Port : 378/IRQ7
Onboard Parallel Mode : ECP
ECP Mode use DMA : 3
Onboard Serial Port 3 : 3E8H
Serial Port 3 Use IRQ : IRQ5
Onboard Serial Port 4 : 2E8H
Serial Port 4 Use IRQ : IRQ10
OnChip First/Second Channel
This chipset contains a PCI IDE interface with support for two IDE channels.
Select Enabled to activate the first and/or second IDE interface. Select Disabled to
deactivate this interface, if you install a first and/or second add-in IDE interface
IDE interface.
IDE Prefetch Mode
Enable pre-fetch for IDE drive interface that supports its faster drive access. If you
are getting disk drive errors, change the setting to omit the drive interface where the
errors occur. Depending on the configuration of your IDE subsystem, this field
may not appear, and does not appear when the Internal PCI/IDE field, above, is
Disabled.