Unicorn ENDAT-586EL, Руководство пользователя

Страница: 24 / 58

User’s Manual 18
OnChip USB
Select “Enabled” if your system contains a Universal Serial Bus (USB) controller
and you have a USB peripheral. The “Assign IRQ for USB” has to be set to
Enabled on “PnP/PCI Configuration” (when the USB be used.)
3-4. Details of Power Management Setup
ROM PCI/ISA BIOS (2A5LEU4B)
POWER MANAGEMENT SETUP
ACPI Function : Disabled
Power Management : User Define
PM Control by APM : Yes
Video Off Option : Suspend
à
Off
Video Off Method : V/H Sync + Blank
MODEM Use IRQ : 3
Soft-Off by PWRBTN : Instant-Off
** PM Timers **
HDD Power Down
: Disable
Doze Mode : Disable
Suspend Mode : Disable
** PM Events **
VGA
: OFF
LPT & COM : LPT/COM
HDD & FDD : ON
DMA/Master : OFF
Primary INTR : ON
IRQ3 (COM2) : Primary
IRQ4 (COM1) : Primary
IRQ5 (LPT 2) : Primary
IRQ6 (Floppy Disk) : Primary
IRQ7 (LPT 1) : Primary
IRQ8 (RTC Alarm) : Disabled
IRQ9 (IRQ2 Redir) : Secondary
IRQ10 (Reserved) : Secondary
IRQ11 (Reserved) : Secondary
IRQ12 ( PS/2 Mouse) : Primary
IRQ13 (Coprocessor) : Primary
IRQ14 (Hard Disk) : Primary
IRQ15 (Reserved) : Disabled
Power Management
This category allows you to select the type (or degree) of power saving and is
directly related to the following modes:
1. Doze Mode
2. Suspend Mode
3. HDD Power Down