User’s Manual
20
Video Off Method
This determines the manner in which the monitor is blanked
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and to write blank to the video buffer
Blank Screen
This option only writes blank to the video buffer
DPMS
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Electronics
Standard to select video power management values
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
Soft-Off by PWRBTN
When Enabled, turning the system off with the on/off button places the system in a
very low-power -usage state, with only enough circuitry receiving power to detect
power button activity or Resume by Ring activity.
PM Timers
The following four modes are Green PC power saving functions which are only
implemented when User Defined Power Management has been selected.
HDD Power Down
When enabled and after the “Set time of system inactivity”, the hard disk drive will
be powered down while all other devices remain active.
Doze Mode
When enabled and after the “Set time system inactivity”, the CPU clock will run at
a slower speed while all other devices operate at full speed.
Suspend Mode
When enabled, after the “Set time of system inactivity”, all devices except the CPU
will be shut off.
Содержание ENDAT-586EL
Страница 2: ......
Страница 10: ...User s Manual 4 1 4 Motherboard Layout...
Страница 34: ......
Страница 58: ...User s Manual 52...