Unicorn ENDAT-586EL, Руководство пользователя

Страница: 29 / 58

23
The ENDAT-586EL All -In-One motherboard
Resource Controlled By
The Award Plug and Play BIOS has the capability to automatically configuring all
of the boot with Plug and Play compatible devices. However, this capability means
absolutely nothing unless you are using a Plug and Play operating system such as
Windows95, 98 or NT.
Reset Configuration Data
Normally, you can leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD), when you exit Setup, if you have installed a
new add-on device and system configuration has caused such a serious conflict that
the operating system cannot boot.
IRQ3/4/5/7/9/10/11/12/14/15 Assigned to
When resources are controlled manually, assign each system interrupt as one of the
following types, depending on the type of device using the interrupt:
Legacy ISA Devices compliant with the original PC AT bus specification, requiring
a specific interrupt(such as IRQ4 for serial port). PCI/ISA PnP Devices compliant
with the Plug and Play standard, whether designed for PCI or ISA bus architecture.
DMA0/1/3/5/6/7 Assigned to
When resources are controlled manually, assign each system DMA channel as one
of the following types, depending on the type of device using the interrupt:
Legacy ISA Devices compliant with the original PC AT bus specification, requiring
a specific interrupt (such as IRQ4 for serial p ort). PCI/ISA PnP Devices compliant
with the Plug and Play standard, whether designed for PCI or ISA bus architecture.
CPU to PCI Write Buffer
When enabled, up to four D words of data can be written to the PCI bus without
interrupting the CPU. When disab led, a write buffer is not used and the CPU read
cycle will not be completed until the PCI bus signals that it is ready to receive the
data.