UNIA TWISTER Скачать руководство пользователя страница 44

Страница: 44 / 96

Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER

TURNING ON/ OFF DRAUGHT BAR TO TRANSPORT POSITION

Use

buttons to set the arrow marker next to the picture of

Press and hold

button until the sign changes into the negative. In such case, there is no

draught bar motion finishing TRANSPORT POSITION sequence.

Analogicaly switch on the draught bar at TRANSPORT sequence. Setting is remembered after power

supply of controller is switched off.

TRANSPORT POSITION

Finishing operating with the wrapping machine it is a must to prepare it for transportation on public

roads. Transport sequence was designed to simplify that process.

After selecting

“

” field in the MAIN MENU and pressing

button, picture

„

” symbol starts to

blink.

The first step of the starting sequence is verifying if:

- WRAPPING MACHINE ARMS are in ZERO POSITION (S13 sensor is active)

- LOADER is in BOTTOM POSITION (S11 sensor is active)

- DRAUGHT BAR is in OPERATING POSITION (S18 sensor is active)

Failing in any of the conditions could result in a mechanical damage to the wrapping machine during

the automatic transportation sequence.

Following movements of TRANSPORT SEQUENCE is:

TABLE MOVEMENT FOR UNLOADING (until the S21 sensor is active)

MANUAL FOLDING OF SETTER AND ACKNOWLEDGEMENT WITH BUTTON:

TABLE MOVEMENT TO THE HORIZONTAL POSITION (until the S20 sensor is active)

FRAME MOVEMENT UPWARDS (until the S12 sensor is active)

DRAUGHT BAR FOLDING ( the S18 sensor inactive)

In case, during the first step of the starting sequence, any of the sensors is in a wrong position or dur-

ing following steps any movement takes too long, program switches automatically to MANUAL

OPERATION in order to set wrapping machine manually into correct transport position. Flashing sen-

sor number is displayed at the same time on the bottom of MANUAL OPERATION screen, showing

which

sensors’ wrong position has interrupted TRANSPORTATION SEQUENCE. Additionally, the ar-

row marker is set automatically on manual movement of sequence connected with the flashing sensor

number.

Содержание TWISTER

































































































Результаты поиска

Содержание TWISTER

Отзывы:

Похожие инструкции для TWISTER

Бренды по названию

Популярные бренды

UNIA TWISTER, Руководство по эксплуатации

Результаты поиска

Содержание TWISTER

Отзывы:

Похожие инструкции для TWISTER

Бренды по названию

Популярные бренды