UNIA TWISTER Скачать руководство пользователя страница 3

Страница: 3 / 96

Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER

MACHINE IDENTIFICATION

The data plate is fixed permanently to the frame, at the left-hand side of the wrapping machine.

The information given on the data plate (Fig 1) enables to clearly identify the machine:

the manufacturer’s name and data,

machine name,

year of production,

serial number,

weight,

„CE“ mark,

KJ mark

– quality control.

1. INTRODUCTION

If you find this inscription in the text when reading the instructions, study it care-

fully; be beware of danger yourself and inform the other operators of it!

1.1.

Read the operating instructions

This operating instructions gives its user information about usage, operating and maintenance of

the machine , includes operating characteristics and requirements of safe and professional usage

of the machine what allows for its best handling at maximum life possible and reliability at the

same. It also includes directions how to order the spare parts. Studying the operating instructions

will help you to avoid accidents, to preserve the guarantee until the end of the guarantee period;

beside that you will always have operational and effective machine at your disposal ready for use.

The operating instructions is basic accessory of the machine.

It is forbidden to maintain any actions at the machine before familiarizing

with the contents of the operating instructions.

Any and all detailed information concerning the machine and the explanations to the operating in-

structions should be provided by the salesman or the manufacturer.

The manufacturer’s address:

UNIA - FAMAROL

ul. Przemysłowa 100

tel. Office

+48 (059) 841-80-01

76-

200 Słupsk, Poland

tel. Sales Department

+48 (059) 842-78-20

fax Sales Department

+48 (059) 841-37-25

tel. Service

+48 (059) 841-80-27

The manufacturer reserves the right to introduce changes in the machine construction and

the operating instruction content.

Fig. 1 Data plate

Содержание TWISTER

































































































Результаты поиска

Содержание TWISTER

Отзывы:

Похожие инструкции для TWISTER

Бренды по названию

Популярные бренды

UNIA TWISTER, Руководство по эксплуатации

Результаты поиска

Содержание TWISTER

Отзывы:

Похожие инструкции для TWISTER

Бренды по названию

Популярные бренды