UNI-T UTL8200 Series Скачать руководство пользователя страница 4

Страница: 4 / 27

UTL8200 User Manua

will not be liable for the personal injury and property losses caused by the user's failure to

comply with the following terms.

Correct connection of ground wire

To avoid electric shock, please use the provided cable to connect and make sure that the

product is properly grounded before use.

Operating voltage

Please ensure that the main supply does not exceed 10% of rated operating range to

prevent product damage.

Use the correct power cord

Only use the dedicated UNI-T power cord to connect the measured power supply and the

electronic load to ensure that there is no overheat by short-circuit current, otherwise

electric shock may occur.

Input voltage

Please notice the product symbols before connecting. The instrument supports 2 kinds of

AC input method: 110V and 220V. Please check if the switch of load matches with the

input power source and if the fuse is correctly installed.

Please do not use the instrument in inflammable and explosive environment.

Do not use or store the instrument in high temperature, high humidity, flammable,

explosive and strong magnetic field environments.

Safety symbols

Danger

Power on

Grounding

Power off

Protective grounding

Chassis

Signal ground

Warning

Environment-Friendly Use Period (EFUP)

Waste Electrical and Electronic Equipment (WEEE) Instruction 2002/96/EC

This product contains certain hazardous substances and

can be used safely during its environmental-friendly use

period (EFUP) of 40 years, as shown in the symbol on the

left. If the specified time is exceeded, the product should

be recovered.

Do not dispose the product and its accessories in trash bin.

Содержание UTL8200 Series




























Результаты поиска

Содержание UTL8200 Series

Отзывы:

Похожие инструкции для UTL8200 Series

Бренды по названию

Популярные бренды

UNI-T UTL8200 Series, Руководство пользователя

Результаты поиска

Содержание UTL8200 Series

Отзывы:

Похожие инструкции для UTL8200 Series

Бренды по названию

Популярные бренды