UTL8200 User Manua
24
Figure 5 <Menu> Setting Page
5.1 System Configuration
Put the cursor on the field [System Configuration] and press [Enter] to enter the <System
Configuration> page.
System parameters
Setting contents
Description
Language
[CHN]/English
Set system language
Knob active
On/Off
If it is ON, the parameter will change
immediately after rotating the knob.
Warn sound
On/Off
Whether to enable warn sound
Key sound
On/Off
Whether to enable key sound
Initial mode
Default/Last
Default: Boot into the CC mode interface
Last: Boot into the last test mode
Restore factory setting
Choose to restore factory settings: The
instrument will delete the current setting
parameters and restore to the status of
factory settings
Baud rate
9600/19200/384
00/57600/115200
Set the baud rate of RS232 communication
interface
Address
001~032
Set the current communication address
Example [Language]
Figure 5-1-1 Current Setting Status (Yellow, Locked)
