UTL8200 User Manua
21
Stop voltage Set the lower limit voltage of stopping discharge
In the battery mode, select any needed discharge mode, and set the load parameters and
stop voltage of this mode. When the battery is discharged to the stop voltage, the
electronic load will automatically stop loading.
Figure 4-1-7 Battery Mode
Description of battery mode:
In the actual test process, the users can check the battery voltage, discharge current and
discharged capacity at any time.
Operation steps:
1. After starting up, first press the CH button to select the operating channel. The yellow
wireframe area is the selected channel. And CH1 or CH2 will be displayed at the top
of the screen (UTL8212 only).
2. Press the Mode button to enter the mode selection interface, select the battery mode
with the pulse knob or direction buttons, and then press Enter to enter the battery
mode setting interface.
3. Select the modified parameter with the pulse knob, press Enter to modify, and press
Enter again to save the modification.
4. After setting the parameters, press the ON button to enter the battery test interface
(channel 1: ON1, channel 2: ON2).
5. Press the ON button to start the operation, and press the ON button again to stop it.
4.2 Short Circuit Test
In CC/CV/CP/CR mode, when the electronic load is with voltage (at least 0.5V), press
Shift, then press the
→ button (Shift+→=short) to turn on the short circuit test mode. A
short circuit symbol [Short] will be displayed on the screen.
Operation steps:
1. After starting up, first press the CH button to select the operating channel. The yellow
wireframe area is the selected channel. And CH1 or CH2 will be displayed at the top
Battery Voltage
Stop Voltage
CC Battery Discharge Mode
Discharge Time
