UTL8200 User Manua
23
setting interface, and refer to chapter 5.2 to adjust the voltage/current position.
8. Logic error: The input data does not conform to logic. For example: (1) In CC mode,
the product of voltage and current exceeds the load maximum power. (2) If the upper
limit value entered in the list mode is lower than the lower limit value, a warning
window will be displayed. Please reset the appropriate value.
4.5 Local/Remote
The electronic load has two operating modes: local and remote. The load can switch
between two operating modes by pressing the Local button. The initial operation mode is
local by default.
Local: Use the buttons on the electronic load to operate. The upper computer cannot
remotely control the load, and only the current operating data can be read.
Remote: The electronic load is connected to the PC through communication cables, and
commands are sent on the PC to perform operations on the load through the upper
computer software. When the electronic load is in remote mode, except for the
Local/Remote button, other buttons on the panel will not work. When the users do not
need the remote function, they can switch to local mode by pressing the Local/Remote
button.
The status bar at the top of the screen will display Local/Remote, indicating the current
control status of the load. The users can judge the control status according to the screen
display.
5. System Configuration Page (Menu)
System Configuration
Parameter Setting
File
Instrument Info
The main menu setting is divided into four parts: system configuration, parameter setting,
file, and instrument info. The parameter setting only affects the selected channel (for
UTL8212, first press the CH button to select the setting channel), and other settings are
effective to the whole instrument.
First press Shift, then press Mode to enter the system <Menu> setting page, as shown in
Figure 5.
