UNI-T UTD2000M, Руководство по эксплуатации

Страница: 75 / 94

UTD2000M User Manual
Fig. 3 ‐ 14 Save Bitmap into a U ‐ Disk
Save the Settings of this Instrument
To save the measured waveform data into a U ‐ disk, following steps can be followed:
1
、
Insert U ‐ disk into the USB ‐ HOST port located on the front panel of the oscilloscope;
2
、
Press STORAGE key and then press F1. Thereafter, use “MULTIPURPOSE” knob to select “Settings”;
3
、
While in waveform storage menu, press F5 to enter into USB menu;
4
、
Press F1 key and change the file name by turning “MULTIPURPOSE” knob. After press F5 for confirmation, the
screen image will be saved to the root directory of the U ‐ disk successfully under the designated name.
Save Waveform Data
UTD2000CM series instruments also provide waveform storage function, which can be used to export data in CSV
format for analysis. Please follow the following steps to operate:
1
、
Insert U ‐ disk into the USB ‐ HOST port located on the front panel of the oscilloscope;
2
、
Press STORAGE key and then press F1. Thereafter, use “MULTIPURPOSE” knob to select “Settings”;
3
、
Press F2 key to select signal source ‐ CH1 or CH2;
4
、
While in waveform storage menu, press F5 to enter into USB menu;
5
、
Press F1 key and change the file name by turning “MULTIPURPOSE” knob.
6
、
Press F2 to export data in CSV format to U ‐ disk or save in the flash memory of this unit;
7
、
After press F5 for confirmation, the waveform data will be saved to the root directory of the U ‐ disk successfully
under the designated name.
74