DC Power Supply [DPG-30R & DPG-MC60R, DPG-MC120R, DPG-MC240R]
4. Operation
39
4) Output value setting method (during LOCAL only)
Only during LOCAL, you can set the output values by pressing and holding the DSP SW.
The display changes to (Initial) kW monitor & V monitor ->
kW monitor or A monitor or V monitor (control mode currently used) & SETPOINT monitor.
The SET LED starts flashing at the same time as the display changes.
Ex: When not performing output
HARC
kW
A
MARC
SET
V
V
kW
Power monitor
Voltage monitor
Changes with the control mode currently used.
PSEL P control
HARC
kW
A
MARC
SET
V
SET
kW
Flashing
ISEL I control
HARC
kW
A
MARC
SET
V
SET
A
Flashing
]
VSEL V control
HARC
kW
A
MARC
SET
V
SET
V
Flashing
The location with the flashing number is the digit that can currently be configured.
Please change the setting digit by the FUNC SW and change the setting value by the
△
or
▽
SW. It determines by ENT SW.
Ex: During P control, set to 3 kW
HARC
kW
A
kW
MARC
SET
V
SET
Flashing
HARC
kW
A
MARC
SET
V
SET
kW
Flashing
Press and hold DSP SW
Press and hold DSP SW
Press FUNC SW +
△
SW
Flashing
Flashing
Flashing
Flashing
Flashing