UltraGlow G33R-1 Zero Clearance Rear Vent Direct Vent Gas Fireplace
7
INSTALLATION
COMBUSTIBLE MANTELS
Because of the extreme heat this fi replace emits, the mantel clearances are critical.
Combustible mantel clearances from top of unit are shown
in the diagram below.
Note: A non-combustible mantel may be installed at a
lower height if the framing is made of metal studs
covered with a non-combustible board.
This drawing is to scale at 1:6 (one inch = 6 inches). Mantel
can be installed anywhere in shaded area or higher using the
above scale.
Note: Ensure the paint that is used on the mantel and the
facing is "heat resistant" or the paint may discol-
our.
MANTEL LEG CLEARANCES
Combustible mantel leg clearances as per diagram:
Maximum
1-1/2" projection at 2" minimum clearance.
