UltraGlow G33R-1 Zero Clearance Rear Vent Direct Vent Gas Fireplace
15
Pipe Length
(see parts list)
Vertical
Termination
Cap
Storm Collar
Adjustable
Flashing
0/12 to 6/12
(D)
Vertical termination kit
(part #978)
Pipe Length
(if required)
Elbow
Elbow
(B)
Wall Thimble
(Part #942)
(C)
Vinyl siding
standoff
(Optional)
Vent Guard
946-506/P
(optional)
Rigid Pipe Adaptor
(Part# 510-994)
Termination Cap
(Part# 946-523)
(patent pending)
AstroCap
INSTALLATION
RIGID PIPE VENTING SYSTEMS
Horizontal or Vertical Terminations
Alternate Horizontal
Termination Caps
Alternate Horizontal
Riser Vent Terminal
Part# 640-530/P
Alternate Snorkel Ter-
mination Cap Part#
982 (14")
Part# 981 (36")
This product has been evaluated by Intertek for
using a Dura-Vent Flue Adaptor in conjunction
with Selkirk Direct-Temp and Ameri Vent Direct
venting systems. Use of these systems with the
Direct Vent GS starting collar is deemed accept-
able and does not affect the Intertek WHI listing
of components.
WARNING:
Do not combine venting components from
different venting systems.
However use of the the AstroCap
TM
and FPI
Riser is acceptable with all systems.
When using piping other than Simpson
Dura-Vent, 3 screws must be used to
secure rigid pipe to adaptor.
The FPI AstroCap
TM
and FPI Riser Vent terminal is certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS,
American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPI
TM
, and FPI AstroCap
TM
are the proprietary trademarks of FPI Fireplace
Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
