UltraGlow G33R-1 Zero Clearance Rear Vent Direct Vent Gas Fireplace
22
8) Place the embers on the front of the burner
tray in the places shown on the photo.
Place embers in these 3 locations
on the burner tray.
9) Test fi re to ensure proper light off (make
sure fl ame fl ows smoothly from one end of
burner to the other). If there is any fl ame
hesitation, check that area for any blockage
of the burner ports.
10) Install fl ush glass and bay glass (if used) as
per instructions in this manual.
251
250
253
254
252
INSTALLATION
Notch
Bracket
Bracket
254
250
254
5) Position Log 253 across the cutouts in Logs
250 and 254 with the notch on the left side
of the log fi tting into the 2nd grate tab.
Cutouts
2nd Grate Tab
253
250
254
5th Grate Tab
6) Place the bottom left front edge of Log 251
against the left edge of the burner tray and
rest the log on the cutout on Log 253.
7) Position Log 252 across the cutouts in Logs
254 and 253. The notch in the bottom right
end fi tting against the 5th grate tab.
251
252
250
254
253
250
254
253
253
254
Cutout
4) Place Log 254 on the front right side of the
burner. Push the back of the log against
the 2 brackets with the notch on the bottom
right side of the log fi tting into the right side
of the grate.
