Ultra motor Europa, Руководство пользователя

Страница: 22 / 34

the electrical system self-test. At the conclusion of the self-test, assuming
that you have a full battery, the GREEN (FULL) LED will remain
illuminated, and the beeping will cease.
™
Apply motor power by rotating the twist throttle toward you.
Note: The electrical system of your Ultra Motor electric bicycle allows for
gradual application of power, and allows for adjustment of power between OFF
and FULL. This feature enables you to set that speed at which you are most
comfortable.
Note: The electrical system of your Ultra Motor electric bicycle will provide
instantaneous power whether you are pedaling or not. Therefore, there is no need
to pedal as you start-up. However, the motor consumes more power during a
start from a standing stop than at any other time. More power is consumed
during start-up than even climbing a steep hill. Therefore, in order to conserve
battery power, and increase your overall range, pedal during a start from a
standing stop to relieve some of the load from the battery.
Note: Remember that there are power cut-off switches imbedded in the brake
levers. When you apply the brakes, power to the motor will turn “OFF”.
Therefore, do not hold the brake lever(s) when you want the motor to run.
™
Cycle Computer
o
Your Ultra Motor electric bicycle is equipped with a state-of-the-art digital
cycle computer. This cycle computer gives important data about your
ride, including speed, trip and cumulative distance, elapsed riding time,
time-of-day, etc.
o
For operation of your cycle computer, please refer to the directions
included with this manual.
™
Cruise Control
o
Your Ultra Motor electric bicycle is equipped with Cruise Control. Cruise
Control is an accessory that, when activated, will hold your bike at a
preset speed.
o
To actuate Cruise Control, accelerate the bike to the desired speed.
Depress and release the green “CRUISE” button below the State-Of-
Charge indicator on the throttle body. The Cruise Control will hold the
speed selected.
o
To disengage the Cruise Control, do one of the following:
ƒ Depress the green “CRUISE” button and release
ƒ Apply either the LEFT or RIGHT or BOTH brake levers
ƒ Turn “OFF” the power with the ‘ignition’ switch.
Note: The Cruise Control works by holding a constant flow of energy (amperage)
to the motor. Therefore, if you encounter an up hill climb, expect the bike to slow
22