WARNING: Failure to properly adjust and lock your front wheel quick release
may result in the inadvertent separation of the front wheel while you are riding
the bicycle. This occurrence can result in serious injury or death, and property
damage. Please refer to the instructions on Page 14 for the proper installation
and adjustment of your front quick release hub.
o
Re-set the front caliper brake by reversing the ‘Releasing the caliper
brakes’ instructions.
WARNING: If you are unsure about this brake set-up and adjustment
procedure, please take your Ultra Motor bike to your selling dealer, or any
qualified bike mechanic, and ask for assistance in adjusting the brakes.
Improperly adjusted brakes may cause reduced braking performance, leading to
an accident that could result in serious injury or death, and property damage.
DO NOT ride your bike if you are not confident that the brakes are working
properly.
•
Removing the rear wheel:
o
Using the shifter control on the left side of the handlebar, up-shift the
derailleur so the chain is riding of the 7
th
-gear (smallest) cog.
o
Release the rear caliper brakes by following the procedure described
above.
o
As your Ultra Motor electric bicycle is equipped with a powerful hub
motor, an anti-torque bar is added to the motor to prevent the motor from
turning in the frame. This anti-torque bar must be disconnected from the
bicycle before removing the rear wheel. See photo below.
o
Disengage the anti-torque bar by removing the retaining bolt holding it to
the frame.
o
Disconnect the motor power plug. See photo below:
32
Содержание Europa
Страница 1: ...Europa Electric Bicycle Owner s Manual 1...