Ultra motor Europa, Руководство пользователя

Страница: 16 / 34

2. Rotate the stem up or down to the desired position.
3. Securely retighten the fixing bolt with the 6mm hex wrench.
Install the Seat and Seat Post
Some models of Ultra Motor electric bikes are packaged with the seat and seat post
removed from the frame.
1. Open the quick release seat post clamp.
2. Insert the seat post into the frame tube.
3. Position the seat post into the frame tube far enough so that the “Maximum
Height” mark is hidden inside the frame.
WARNING: Riding the bicycle with the seat post extended beyond the
Maximum Height mark on the seat post can overstress the frame potentially
causing frame failure. Frame failure could cause a loss of control resulting in
serious injury or death, and property damage. Always check to insure that
the “Maximum Height” mark on the seat post is hidden inside the frame. If
you cannot raise the seat high enough to ride the bicycle comfortably, contact
your local bike dealer for a longer seat post.
4. Securely close the seat post quick release. A properly adjusted seat post clamp
will prevent rotation of the seat post when the bike is in use. If, after you have
closed the seat post quick release lever, you can force the seat to rotate, open the
seat post quick release and turn the adjusting nut on the left hand side of the quick
release lever ½ turn, close the lever, and test the retention of the seat post again.
Repeat this process until you can no longer move the seat.
WARNING: An improperly secured seat post could lead to loss of control of
the bicycle while riding, causing an accident that may result in serious injury
or death, and property damage.
Install the Pedals
Two pedals (a left pedal and a right pedal) are supplied with your bike. Each pedal is
DIFFERENT. The right pedal has conventional right-hand threads cut into the part of the
axle that screws into the crank arm. The left pedal has left-hand threads. It is very
important that the pedals be installed on the correct side.
16