Ultra motor Europa, Руководство пользователя

Страница: 31 / 34

instructions shows the procedure being used on the rear brake. Nevertheless, the
procedure is identical for either the front or rear wheel.
o
Pinch the brake calipers together and pull the end cap and cable guide out
of the linkage slot. Release the calipers. See photo sequence below.
•
Removing the front wheel
o
Release the front caliper brakes by following the procedure described
above.
o
Release the front hub quick release by rotating the quick release lever
away from the hub.
o
Turn the adjusting nut on the opposite side of the hub from the quick
release lever counter clockwise until the nut and quick release lever body
clears the safety protrusions on the fort tip.
o
After repairing the flat tire, replace the front wheel according to the
instructions provided beginning on page 14.
31