Ultimate Jets
- Phoenix Mk2 assembly manual - Revision 2 - 08/11/2013
Gear :
Please, use only the struts supplied by Ultimate Jets.
If you use standard struts, you will have to modify the gear
position and the fuselage reservations.
Fasten the main retracts on the plywood mount using the M4
x16 mm socket head screws provided.
Fasten the front gear on the plywood mount .
Secure the front retract with four 4x16 mm
socket head screws.
Fasten the steering servo inverted on the plywood frame
Connect servo to steering arm with 2 mm ball link + steel wire
You might want to drill a 3 mm hole in the bottom of the fuselage
to access the servo spline screw.
The strut steering arm should be connected
thanks to a pull-pull system and crimping
tubes. Just loop the wire around the arm tight
and crimp. On the servo side, use a stiff servo
arm or disc. The 2 mm ball links on the servo
side will help in adjusting the tension . Do not
make it too tight or you might restrict the
down lock.
