Ultimate Jets
- Phoenix Mk2 assembly manual - Revision 2 - 08/11/2013
Engine installation :
The engine must be secured with four M3x20 mm sheet metal screws onto the rear turbine reservation.
A plywood reinforcement is already glued inside the fuselage
For small engine like the P60 or Merlin 100, the engine mounts will not be large enough to be screwed
on the fuselage.
In this case, cut mounting plates from 3 mm aluminium or carbon fiber.
Make all the necessary holes in the fuselage for the electric harness as well as the fuel tubes in front of
the engine.
ECU installation :
Fit the ECU on one side of the plane.
Fit the fuel pump and the valves just aft of the ECU and hold them with tie wraps.
