Ultimate Jets
- Phoenix Mk2 assembly manual - Revision 2 - 08/11/2013
INTRODUCTION
The Phoenix MK 2 is our new jet trainer. It is full composite, delivered assembled and painted.
It is designed for jet beginners with following objective :
-
Very easy to fly.
-
Short take off and landing due to big airfoil thickness (13%), large flaps and low wing loading
-
Very fast assembly
-
Easy access to engine (top engine, no hatch, no exhaust pipe)
-
Easy access to fuel tank , ECU and radio thanks to a large fuselage hatch.
-
Easy radio installation thanks to the large fuselage hatch and supplied servo covers.
The model comes to you finished and painted in mold. All the CNC machined bulkeads are glued. All
the control surfaces are live hinged. No gluing is required. This model has plug in type wings, stabs and
fin booms for an easier transport.
All necessary hardware are included in the kit ( options available like the kevlar tank and gear )
Assembly require only few hours to fit engine and radio.
The Phoenix ARF model includes
:
- High quality epoxy-glass fuselage painted.
- All plywood and wood parts premounted.
- Fully molded wings with winglets, stabs and fin booms painted
- High tensile aluminum ( AU4G ) wing tube.
- Access hatch requiring no additional framework.
- All hardware (screws, servo cover, ...)
- Instructions in English with pictures.
Parts required to complete the kit :
- 2.2 liters kevlar fuel cell
- 2.2 liters kevlar fuel cell with UBT
