Ultimate Jets
- Phoenix Mk2 assembly manual - Revision 2 - 08/11/2013
Aileron and flaps servos :
Proceed as for the stabilizer servo :
Fasten the servo in the servo cover (you can also glue it
with silicon glue for increased safety).
Place the servo cover in the wings pockets.
Drill four 1 mm holes in the wings for the screws.
Cut a slot in the control surface for the fiber control horn
Glue the control horn with Hysol E20HP.
Connect two 2 mm link with M2 threaded rods.
Secure the servo cover with the 4 countersink sheet
metal screws.
Connect the servo to the control horn.
Apply thread lock.
Flaps control horn
Aileron control horn
